Platform, Truck Scale, Testing, Crane Scale application
1.0 inch Red FND Display
4 Section Multi-Calibration
A/D Sampling : 80times/sec
Peak / Sample / Average Hold Function
Rs-232C Serial Interface built in(Standard) 1port
Display Resolution : 1/30,000
Part No. Memory, Max.99
Serial Interface Max. 4pcs
Current Loop 1port standard built in (Standard)
Trans type Power Supply – AV110/220V (Dip S/W selectable)


Application DN500  Series Dimension and Panel Cutting Size


General Spectification
Input Sensitivity 0.45㎶ / Digit
Load Cell Excitation DC 10V ( – 5V ~ + 5V )
Max. Signal Input Voltage Max.32mV
Temperature Coefficient [Zero] ±20PPM/℃ / [Span] ±20PPM/℃
Input Noise ±0.6㎶ P.P
Input Impedance Over 10㏁
A/D Conversion Method Sigma-Delta
A/D Resolution(Internal) 260,000 Count(19bit)
A/D Sampling Rate Max. 80times / Sec
Non-Linearity 0.01% FS
Display Resolution(External) 1/30,000


Display Part
Display Parts Specification
Display Main Display 7Segments, 6 Digit RED FND Display
Size :25.4mm(H)×14.4mm(W)
Min. Division ×1, ×2, ×5, ×10, ×20, ×50
Max. display value 999,950
Under Zero value “-” (Minus display)
Status lamp Steady, Zero, Print, Gross, Auto, g, kg, ton, Tare, RTxD Green color Condition display Lamp (10pcs)
K e y Number, Function Key Number Key, Function (12pcs)


– Option
Option No.1 0~10V (Analogue Output)
Option No.2 4~20mA (Analogue Output)
Option No.3 RS422/485(Serial interface)
Option No.4

※ Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.